I realise I could put the drive in IDE compatibility mode in the BIOS but I prefer to try and run with AHCI if possible. (If you have trouble with the NEC drivers, alternately, you can try the drivers listed under "TEAC Corporation" manufacturer, with the driver marked "TEAC USB Floppy", following the same instructions above.Every so often I need to install Win XP on a machine that has a SATA drive and have to go through the whole mess of finding a floppy drive for the AHCI drivers and hitting F6 during setup, or slipstreaming them onto the Windows XP installation media. (If you have trouble with the NEC drivers, alternately, you can try the drivers listed under "TEAC Corporation" manufacturer, with the driver marked "TEAC USB Floppy", following the same instructions above.) ![]() The "NEC USB Floppy" should now show up under your list of USB Controllers, and with any luck, it should have mounted itself as the A:\ drive in your windows explorer. Wait a few moments, and you should get the "Windows has successfully updated your drivers" screen.You will get a "Update Driver Warning" about compatibility.On the right side of the window, under "model" select "NEC USB Floppy" then click on "Next".Scroll down to "NEC Systems" and click on it.Wait a few seconds for the list of manufacturers on the left side of the window to populate. ![]() ![]() (this is the main difference in steps between Win7 and Win10) Click "Show All Devices" at the top of the list, then click on "Next".Click "Let me pick from a list of available drivers on my computer".Under "Other Devices" look for the SFD-321u entry.Here is how to install the SFD-321u in Windows 10:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |